Gasboy CFN Series Profit Point PLUS - Manual (Page 9)

MDE-4299B CFN Series Profit Point PLUS Installation Manual · March 2007 Page 5
Purpose System Layout
3 – System Layout
Purpose
The purpose of this section is as follows:
• It provides information to help plan the installation of Profit Point PLUS components
within the CFN system.
• It covers the basic description, location, and environmental requirements of the Profit
Point PLUS system. A dimensional drawing is included for components manufactured by
Gasboy.
• It covers conduit requirements and gives conduit layout examples for the basic system
configuration. Careful planning for the layout of the site helps eliminate possible problems
with the startup of your system and ensures that there is continued, reliable system
operation.
Profit Point PLUS Console
Description
Batteries are provided with the CFN III system. There is a risk of explosion if batteries are
replaced by the incorrect type.
Dispose of used batteries according to the manufacturer's instructions.
CAUTION
The Profit Point PLUS console is used to initiate and monitor fuel and non-fuel retail
(convenience) sales at the fuel island. The unit is controlled by a microprocessor and
communicates to the SC through an RS-485 to RS-232 converter. The Profit Point PLUS
console is connected to the POS high-speed port labeled Loop 3 on the SC III/SC III PLUS or
the Console Loop on SC II.
Each Profit Point PLUS console can control up to 32 pumps or remote dispensers, although 16
pumps is the factory default.
• A 15 inch flat screen that is used to provide the operator with the current transaction
information and pump status regarding the site.
Note: The Profit Point PLUS console uses the Windows NT
® screen saver. Set up the
Windows NT screen saver to help prevent damage to the screen, which could result if
the display is on the same screen for a long time.
• The keyboard that consists of 128 full-travel programmable keys, with 87 keys being the
factory default.