Gasboy CFN Series Profit Point PLUS - Manual (Page 19)

MDE-4299B CFN Series Profit Point PLUS Installation Manual · March 2007 Page 15
Epson Printer (PA03530003 and PA03750023) for Gasboy Profit Point PLUS System System Layout
Dipswitch Bank 2
SW Function ON OFF
1 Handshaking (busy condition) Receiver Buffer Offline or Receiver Buffer
Full*
2 Reserved (do not change) Never Always*
3 + 4 Select Print Density See Print Density Selection
Table
See Print Density Selection
Table
5 Reserved (do not change) Never Always*
6 Reserved (do not change) Never Always*
7 I/F Pin 6 Reset Signoff Enabled Disabled*
8 I/F PIN 25 Reset Signoff Enabled Disabled*
* Required settings for Profit Point
Baud Rate Table
BPS 7 8
2400 ON ON
4800 OFF ON
9600 ON* OFF*
19200 OFF OFF
Print Density Selection Table
Print Density SW3 SW4
1 - Low Power Consumption ON ON
2 - Normal OFF* OFF*
3 - Medium ON OFF
4 - Dark OFF ON
* Cable and Power Supply is automatically attached to all orders. The part numbers listed above are needed for
replacement parts only.