Gasboy CFN Series Profit Point PLUS - Manual (Page 13)

MDE-4299B CFN Series Profit Point PLUS Installation Manual · March 2007 Page 9
SC III/POS Workstation System Layout
SC III/POS Workstation
The SC is the heart of the CFN system at the fueling site. It controls and allows interaction
between all the automated fueling equipment, including electronic pumps, pump control
devices, card readers, registers, tank monitors, and terminals that are activated by a customer.
It can also be used as a Profit Point PLUS POS workstation. For a more detailed description
and installation instructions for the SC III, refer to MDE-4298 CFN Series Site Controller III
Installation Manual.
The SC III/POS workstation is supplied with a standard 15 inch monitor and a Mid Tower PC.
The dimensions for the 15 inch monitor are: 15.4” W x 16.1” H x 7.7” D. The dimensions for
the Mid Tower PC are: 7” W x 16.75” H x 18.25” D.
Figure 3-3: Site Controller III PLUS/POS Workstation
Loop 1 Island RS-485 Port
Loop 2 Island RS-485 Port
(factory set to 2-wire for Tokheim DPTs)
Loop 3 POS High Speed RS-485 Port
Port 1 local RS-232
Port 6 RS-232
Port 5 RS-232
Port 4 RS-232
Port 3 Dual Tokheim
Note: Location of PC connectors may differ.
PS/2 Mouse
Power
PS/2 Keyboard
COM1/Serial 1
Monitor
Printer
USB1/2
Ethernet
USB3/4
Speaker
COM2/Serial 2
COM Ports 3-6
Note: The USB ports on the CPU tower are
not active and should not be used.