Gasboy Sinclair Credit - Manual (Page 9)

Credit & Debit Card Networks Sinclair 015 1
Gasboy CFN Series
015
Sinclair
If you are connecting your site to Sinclair for card verification and if you have Sinclair software 015 or
greater, use this manual for reference.
Cards Accepted
The credit cards accepted with this network are:
American Express
Master Card
Discover
VISA
The proprietary cards accepted with this network are:
Sinclair Retail
Sinclair Fleet
GASCARD
WEX
PHH*
Voyager
The Sinclair software now complies with the new VISA restriction on the credit card account printed on
Island receipts. Only 4 digits will be printed instead of the complete number.
*Note: this is currently not supported by Sinclair.
Preparing for configuration
You will need the following information from Sinclair before you can start verifying transactions through
Sinclair (contact your Sinclair representative for the numbers):
• Terminal ID
• Host phone number
• Logon ID (if applicable; check with your Sinclair representative)
• Will Instant-On be used?
• Will Discount Pricing be used?
You will need a modem for authorization. This is in addition to a modem used to poll transactions.
Determine the Site Controller port to be assigned to connect to the Sinclair host, and connect that port
to a Hayes modem capable of communicating at 2400 baud or a modem that is 100% compatible with the
Hayes standard. (See the Hayes dial-out settings in the Modem appendix in the Site Controller II Manager’s
Manual.)
If your site has MPDs, your site must be authorized by Sinclair to pump regular-unleaded. This is the
default fuel type used for preauthorizing fleet cards.