Saving data, Credit card parameters (-c), Instant on enabled by pump (-p) – Gasboy Sinclair Credit User Manual
Page 13
Credit & Debit Card Networks
Sinclair 015
5
Gasboy CFN Series
Initialization strings used in default setup
Hayes 12
00
ATV0X0Q0E0M1S0=0S7=255S9=
Hayes Smartmodem
ATV0X0Q0E0M1S0=0S7=255S9=&M0X4&D2&C1&S
Hayes OPTIMA
ATV0X0Q0E0M1S0=0S7=255S9=&Q0X4&D2&C1&S
Hayes Accura 33.6
ATV0X0Q0E0M1S0=0S7=255S9=&Q6&K0
Saving Data
To save the data you have changed, select Quit and then answer Yes to the save confirmation prompt. The
program then stores the information in FRAMOS.CFG and/or in the router tables. If you do not answer Yes,
none of the information you have entered will be saved! (This differs from the older version of the
program.)
The program runs a check on all of the
Sinclair related parameters. Some
parameters cannot be edited within this
program, but the appropriate program is
mentioned if a problem occurs. A message
will be displayed that tells you which of the
parameters is in error.
Credit Card Parameters (-C)
The maximum purchase values and the acceptance of cards by type are set with the SINCLAIR -C
command.
The authorization amount requested at a Island Card Reader (ICR) will be set in the ICR Limit field. If
an ICR is used, this value will be requested from the host.
When a card is used at an ICR, if the account number is to be printed on the customer receipt, then set
Print Acct field to Yes.
The Price Level field is used to set a special price level for a card. 1 is CASH, 2 is CREDIT. The
normal stand-in level is 0. A special pricing level can be used for each card.
Instant-on lets a pump start pumping instantly, while verification is being requested; customers
appreciate this feature, but problems might arise when authorization is denied after some fuel has already
been pumped. If Instant-On is to be allowed for a type of card, then set it to Yes. Instant-on is not available
for fleet cards and cannot be enabled.
Instant On Enabled by Pump (-P)
If Instant On is desired, but not for all fuels, then the individual pumps that dispense a particular fuel can
have Instant On disabled. Select the appropriate pump and answer No to the prompt. You must have Instant
On enabled in the network parameters for the feature to be active.
Diagnostics
Checking SYS_PAR...
Checking READER...
Checking TABLES...No errors detected.
Card Parameters
CARD OK
ICR
Show
Price
Instant
Limit
Acct
Level On - OK
1 Sinclair Retail
Y
$ 50
Y
2
YES
2 Master Card
Y
$ 50
Y
2
YES
3 Visa
Y
$ 50
N
1
NO
4 Discover
Y
$ 50
Y
2
YES
5 Diner’s Club
N
$ 50
Y
2
YES
6 AMEX
Y
$ 50
Y
2
YES
7 Sinclair Fleet
Y
$ 70
Y
2
NO
8 WEX Var
Y
$ 75
Y
2
NO
9 WEX descr
Y
$ 80
Y
2
NO
10 PHH
N
$ 60
N
1
NO
11 Gascard
Y
$100
Y
2
NO