Gasboy M06184K00X - Manual (Page 8)

Installing the M06184K00X Vapor Recovery Kit
Page 8 MDE-4487C Atlas™ Dispenser Vapor Recovery Kit (M06184K00X) Installation Instructions · September 2008
Figure 3: Hose and Retriever Assembly and Parts Identification (Electronic Model
Shown)
3
4
5
6
13
12
17
18
20
11,
16
15
4
5
6
8 14
5
6
7
9
10
19 21
2
Dispenser
Outlet
Drill Hole 5/8” x 1-3/4” Deep in Concrete
1
Mounting the Hose Retriever
The following parts are required to mount the Hose Retriever:
• 032671 - Clamp and Reel Assembly (item 1 )
• 063838 - Support Post (item 2 )
• 017930 - 1-1/2 inch Cap Plug (item 3 )
• 051956 - 5/16 - 18 x 2 SS Screw (item 4 )
• Q13454-04 - Flat, SSTL Washer (item 5 )
• 068874 - 5/16 inch SS Lock Washer (item 6 )
• 063200 - Spacer, 3-1/4 inch (item 7 )
• 013250 - 5/16 inch Bolt Anchor (item 8 )
• Q10554-12 - Bottom Plug (item 9 )
• Q10624-23 - 5/16 - 18 x 4-1/4 inch Screw (item 10 )
1 Assemble Clamp and Reel Assembly (item 1 ) to Support Post (item 2 ) with hardware (items 4 ,
5 , and 6 ). See Figure 3 .
2 Install Cap Plug (item 3 ) at the top of the Support Post.