Hose and retriever installation, Assembling and installing product jumper hose, Important information – Gasboy M06430K00X User Manual
Page 10

Hose and Retriever Installation
Page 10
MDE-4522A Atlas™ Self-Contained Pump Vapor Recovery Kit M06430K00X Installation • November 2006
Hose and Retriever Installation
Note: See
“Hose and Hose Retriever Parts List” on page 3
.
Assembling and Installing Product Jumper Hose
Items needed for this procedure are the following:
• Item 11 – 064560 3/4-inch Swivel
• Item 15 – HHS5X009BKX1 3/4-inch HW Hose, 1-foot 4-inches
• Item 16 – K02297 3/4-inch–to–1-inch Bushing
1
Mount the 3/4-inch–to–1-inch bushing (item 16) in the dispenser outlet (see
2
Mount the 3/4-inch swivel (item 11) on the 5/8-inch HW hose (item 15).
3
Connect the fixed end of the 3/4-inch HW hose to the bushing in the dispenser outlet and the
other end (with swivel mounted) to the splitter inlet port labeled FUEL.
Figure 6: Hose and Retriever Assembly with Parts Identification
Use pipe compound (UL-approved gas- and oil-resistant) on all pipe threads.
IMPORTANT INFORMATION