Gasboy M06430K00X - Manual

MDE-4522A Atlas™ Self-Contained Pump Vapor Recovery Kit M06430K00X Installation • November 2006 Page 1
Introduction
This manual provides installation instructions for Atlas ™ Models 8700K, 8800K, 9100K,
9800K balanced system Vapor Recovery (VR) kit M06430K00X.
Self Contained Vapor Recovery Kits
Required Reading
Before installing a kit, the installer must read, understand, and follow:
• This manual
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state and local codes and regulations
Failure to do so may adversely affect the safe use and operation of the equipment.
Note: This kit must be installed by a Gasboy Authorized Service Contractor (ASC) to ensure
warranty.
Required Tools and Materials
The following tools are needed to install the VR kit:
• Standard wrench set
• Drill (capable of accepting a 5/8-inch masonry drill bit)
• 5/8-inch masonry drill bit
• Flat-tip screwdriver
• Cross-tip screwdriver
• Level (capable of checking vertical plumb)
• Pipe compound (UL
® -classified gas- and oil-resistant)
• White lithium-based grease
Kit No. Description
M06430K001 VR Kit, 1 Grade 1 Hose Pump, Electronic
M06430K002 VR Kit, 2 Grade 2 Hose Pump, Electronic
M06430K003 VR Kit, 1 Grade 2 Hose Pump, Electronic
M06430K004 VR Kit, 1 Grade 1 Hose Pump, Mechanical
M06430K005 VR Kit, 2 Grade 2 Hose Pump, Mechanical
M06430K006 VR Kit, 1 Grade 2 Hose Pump, Mechanical
MDE-4522A
Atlas ™ Self-Contained Pump Vapor
Recovery Kit M06430K00X Installation
November 2006