Gasboy Kit M04477K001 - Manual (Page 9)

MDE-4291 Gasboy Gear Train Upgrade Kit M04477K001 • March 2004 Page 9
Installing the Gear Train Upgrade Kit
5 Remove the display drive shaft (054039) from between the gear train and the register and
discard the shaft.
Figure 6: Drive Train Shaft Removal
6 Lift the gear train up and away from the meters and slide it to the left away from the discharge
side of the dispenser. (See
Figure 5 .)
Figure 7: Removing the Gear Train
7 Rotate the gear train toward the front of the dispenser in such a manner that it can be removed.
Remove Display Drive Shaft
Slide Gear Train to the Left
Note: the “Discharge Side” and the side that the Junction
Box are on, when referenced, denotes the FRONT of the
Dispenser.
Rotate Toward the Front and Remove