Gasboy Kit M04477K001 User Manual
Introduction, Installation, Required reading

MDE-4291 Gasboy Gear Train Upgrade Kit M04477K001 • March 2004
Page 1
Introduction
This manual provides installation instructions for the Gasboy Gear Train Upgrade Kit
M04477K001.
Required Reading
Before installing the kit, the installer must read, understand, and follow:
• This manual
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state and local codes and regulations
Failure to do so may adversely affect the safe use and operation of the equipment.
Note: This kit must be installed by a Gasboy Authorized Service Contractor (ASC) to ensure
warranty.
Note: This kit requires approximately 1 hour or less to complete.
Required Tools
The following tools are needed to install the Gasboy Gear Train Upgrade Kit:
• Combination Wrench Set
• #2 Phillips
®
Screw Driver
• Socket & Ratchet Set
• Punch to help align holes
• Two Boards (1 inch x 2 inch x 18 inches long or 1 inch x 4 inches x 18 inch long)
Parts List
M04477K001 - Gasboy 9140Q Gear Train Upgrade Kit
Part Number
Description
Quantity Per
Unit
M04428A001
LINK, METER INTERFACE
2
M04433B001
SHAFT, DISPLAY DRIVE
1
057002
STANDOFF
4
042615
DRIV-LOC PIN 1/8 X 3/4
2
MDE-4291
Gasboy Gear Train Upgrade Kit M04477K001
March 2004
Installation