Gasboy Q User Manual
Introduction, Installation, Required reading

MDE-4369 Aviation Tubing Retrofit Kit for Gasboy® Q Models Kits M05023K001 & K05023K002 • October 2004
Page 1
Introduction
This manual provides installation instructions for Kits M05023K001 & M05023K002 for
Gasboy
®
Q Models. These kits contain hardware required for replacing the copper tubing in
Gasboy Q series commercial pumps and dispensers.
This upgrade will help protect against a possible safety hazard that could be present with
contaminated aviation fuel.
Required Reading
Before installing these kits, the installer must read, understand, and follow:
• This manual
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state and local codes and regulations.
Note: This kit must be installed by a Gasboy Authorized Service Contractor (ASC) to ensure
warranty.
Required Tools
The following tools are needed to install the Gasboy Q Model Kit M05023K001:
• Socket set or combination box & open end wrenches
MDE-4369
Aviation Tubing Retrofit Kit for Gasboy
®
Q
Models Kits M05023K001 & K05023K002
October 2004
Installation