1 - introduction, Purpose, Intended users – Gasboy 9216K User Manual
Page 5: General description, 1 – introduction, Purpose intended users general description
MDE-4906 Atlas™ 9216K/9216KTW Satellite Dispenser Installation/Operation Manual · June 2010
Page 1
Purpose
Introduction
1 – Introduction
Purpose
This manual provides instructions for the installation and operation of Gasboy
®
Atlas
™
9216K/9216KTW satellite dispensers. This manual must be supplied to the electrician prior to
the installation of conduit and wiring to ensure the satellite dispensing unit is installed
properly. Faulty installations are the major cause of unit malfunctions.
The unit must be installed and operated as described in this manual to ensure the reliability and
proper operation of the satellite dispensing unit. Ensure that this manual is left with the owner
after the installation is complete.
Note: For any assistance pertaining to the installation, contact the Gasboy distributor.
Intended Users
This manual is intended for Authorized Service Contractors (ASCs) who will be involved in
the installation of Atlas satellite dispensers.
General Description
Gasboy Atlas satellite dispensing units are used in conjunction with Gasboy-listed Atlas
dispensers. This unit provides additional control of a remote dispensing line.
The features and specifications of the 9216K/9216KTW satellite dispenser are as follows:
• Hose hangers
• Discharge elbows
• A 12 feet gasoline hose assembly
• A working voltage of 115 VAC, 60 Hz for domestic units or 230 VAC, 50 Hz or 60 Hz for
international use
• Unions are provided at the inlet of all suction pumps and dispensers.
• The top and side panels are painted black and the front and rear panels are painted white
for the standard cabinet.
• The height of the cabinets is 39.92” (1013.90 mm).
For other dimensions of the base
layout for each model, refer to
.
• Available options and accessories for the satellite dispensing units include automatic
nozzles, high or low slowdown valves, special lengths of hose, dual swivels, front and
back panels painted to the color specified by the customer, stainless steel panels, and
emergency shutoff valves.