Gasboy 9216K - Manual (Page 31)

MDE-4906 Atlas™ 9216K/9216KTW Satellite Dispensers Installation/Operation Manual · June 2010 Page 27
Operating the Satellite Dispenser
6 – Operating the Satellite Dispenser
To operate the satellite dispenser, proceed as follows:
1 Provide AC power (115 or 230 VAC) to the submersible feed and slow flow/reset motor feed.
If a submersible starter relay is used, AC power (115 or 230 VAC) must be supplied to the
input contacts of the submersible starter relay.
2 Dispense the product.
3 At the master dispenser, the register displays the total volume. If an optional pulser kit is
attached, it supplies pulses which may be recorded by an external monitoring system.
4 The fueling transaction continues to run until the user turns off the dispenser handle.