Gasboy 9216K - Manual (Page 24)

Wiring Wiring Diagrams
Page 20 MDE-4906 Atlas™ 9216K/9216KTW Satellite Dispensers Installation/Operation Manual · June 2010
9800K Series Wiring Diagram
Models - Satellite 9216K/9853K, 9853KTW, 9853KX, 9852KXTW1, 9853KXTW, 9840KX,
9216K/8853K, 8853KTW, 8853KX, 8852KXTW1, 8853KXTW
Notes: 1) All wiring and conduit runs must conform with all building/fire codes, all Federal,
State, and Local codes, NEC, (NFPA 70), NFPA 30, and Automotive and Marine
Service Station Code (NFPA 30A) codes and regulations. Canadian users must also
comply with the Canadian Electrical Code.
2) To determine which mode of satellite operation is relevant for your application, refer
to Weights and Measures Handbook 44. In many cases, the satellite must be wired so
that, it cannot dispense product when the master dispenser is dispensing and vice
versa. Use the correct wiring diagram according to your application.
3) If using a Gasboy 9800K and satellite in an application where both master and
satellite cannot dispense the product at the same time, a minor change to the factory
wiring in the 9800K must be made. Wire the dispenser to the satellite as shown in the
wiring diagram labeled “Non-Simultaneous”.
4) If this unit is equipped for 230 VAC operation (international), connect the wires as
shown in the standard 115 VAC wiring layout diagram.
5) This wiring diagram is intended only to show the connections between the satellite
and the dispenser. For applicable warnings and proper connection of all wires, see
wiring diagram for master dispenser (according to model number). For the complete
wiring information for the dispenser, refer to MDE-4331 Atlas Fuel Systems
Installation Manual.