GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 8)

Foreword L3149B (C200) Advanced Tone Remote Desk Set
2
Features and Benefits
Feature Benefit
Programmable 16-frequeny control
with alias (Tone mode only) Any one of 16 EIA standard tones can be programmed for each
frequency/function key along with an alias for each.
LCD display User-friendly interface displays frequency alias, mode status and
diagnostic information.
Programmable buttons Four buttons provide up to eight user-defined actions, i.e., frequency
selection, alert tones, and button mapping.
Programmable inputs and outputs Inputs and outputs can be configured for a variety of selections.
(Requires relay control option to be installed.)
Paging Manual DTMF, 2-tone, Plectron, 5-tone; Immediate DTMF, Aliased
DTMF, 2-tone, Plectron, 5-tone, custom 2-tone, group paging.
Auto channel select for manual and aliases.
Programmable talk time allows for greater flexibility.
MDC1200 Encode: Call Alert, Select Call, Radio Check, Radio Enable/Disable.
Decode: Call Alert, Select Call, Radio Check, Status Message,
Emergency.
Frequency selection Select frequency changes via keyboard, scroll or programmable
buttons.
Parallel status updating
(Not available in local mode) Enhanced system flexibility when multiple desk sets are connected in
parallel. Each desk set operator knows the selected frequency.
Local, E&M, E&M with tone
control; and CDM1550 LS Mobile
Radio compatible Offers flexibility in types of remote and local control (requires
options to be installed).
Compatible with CDM1550 LS
Mobile Radio (Local mode only) In local mode of operation (designated as L3147 in the software), a
clear-to-send input can be used to automate transmissions using
CDM1550 LS Mobile Radio systems.
Line operated transmit light
(LOTL) LED indicates when another desk set is transmitting, selectable
speaker mute. Can be used to solve feedback problems.
Intercom capability Desk set users can communicate without radio transmission.
Programmable voice delay Speak immediately after pressing PTT or transmitter without clipped
words.
Front-mounted controls Includes mute/unmute and local speaker on/off.
Parallel transmit audio two-wire or
four-wire Allows two-wire full-duplex operation with two-wire adapter. This
is useful for full-duplex and trunking radio systems.
Built-in internal mic and speaker Allows for hands-free communication.
Adjustable RX input sensitivity
and TX output level Allows flexibility with different radio systems and user environments
where radio output levels, line losses, and noise factors vary.
Line RX and TX compression Automatically normalizes varying input and output levels caused by
system factors.