GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 18)

Operation L3149B (C200) Advanced Tone Remote Desk Set
12
Front Panel Buttons
Signaling Buttons
The signaling buttons operate as follows:
MDC
The
MDC
button is used to enter MDC mode. While in MDC mode, the operator may select from among
various MDC1200 messages to be transmitted. These include Call Alert, Radio Check, Select Call, and
Radio Enable/Disable.
PAGE
The
PAGE
button is used to enter page mode. While in page mode, the operator may select from among
various types of pages to be transmitted. These include DTMF, 2-Tone, Plectron, 5/6-Tone, 2805, 1500,
and Immediate DTMF.
CLEAR
The
CLEAR
button uses include clearing the frequency selection during frequency selection mode,
clearing a capcode entry in paging mode, clearing a unit ID in MDC mode, or clearing the MDC status
from the second line of the display.
SELECT
The
SELECT
button is used to select a frequency in frequency selection mode, select a paging type in
page mode or select a MDC1200 type in MDC mode. Note that in paging and MDC modes, the
SELECT
button moves forward through the list. Using
LOCK + SELECT
moves backward through the list.
UP/DOWN BUTTONS
The
UP
and
DOWN
buttons are used to scroll through the MDC1200 message queue in normal operation
or through the available paging and MDC aliases in paging and MDC modes.
Programmable Buttons, PROG 1/5 through PROG 4/8
These four buttons with LED indicators are used to custom configure up to eight user functions. When
shipped from the factory, the programmable buttons are disabled. Use the XAC0008A C200
Programming Software to program the functions. The use and function of these keys are dependent upon
your radio's capabilities.