GAI-Tronics L3149B C200 Advanced Deskset - Manual (Page 72)

Programming L3149B (C200) Advanced Tone Remote Desk Set
66
Alias Table
The Alias Table allows storage of up to 250 distinct Paging or MDC profiles in the C200. This screen
allows you to Add, Delete and Change entries. All aliases currently entered in the table can be seen in
the Table Entries field. The alias order in the table, alias type, paging type (if applicable), name,
capcode (if applicable) and the programmable button it is linked to (if applicable) are displayed.
To change or delete, select the desired entry from the list and click the appropriate button. The OK
button at the top right of the screen saves all changes made to the alias table and closes the current
window.
The Close button closes the window without saving any changes. This button is dimmed and no longer
available if:
 An alias linked to a programmable button is deleted.
 An alias linked to a programmable button is changed from Paging to MDC.
 The name of an alias linked to a programmable button is changed.
Alias Name
Enter an eight character label for the current alias.
Alias Type
Select from Paging and MDC alias types.
Paging Type
This parameter allows selection of the type of paging for the corresponding paging alias name. Paging
types are: DTMF, 2-Tone, 5-Tone, Plectron, 2805, 1500, Custom Paging, and Group Paging.
N OTE : This is only available if the selected Alias Type is Paging.
MDC Unit ID
Valid digits are 0 to 9, A–F, *, and #. Up to four digits are allowed.
N OTE : This is only available if the selected alias type is MDC.
Capcode
The length and valid entries for capcodes differ between paging types. The valid entries for each paging
type are as follows:
DTMF Up to 12 DTMF paging digits can be entered. Valid ranges for each digit are 0–9, A–F,
# and *.
1500, 2805 Allows entry of the 0–12 digit capcode for 1500 or 2805 paging. Valid ranges for
each digit are 0–9.
2-Tone
Allows entry of the three digit capcode for 2-tone paging. All three digits must be
entered. Valid range for each digit is 0–9.
5-Tone
The five-digit (or six-digit if 5-Tone dual addressing is enabled) capcode must be
entered. Valid range for each digit is 0–9.
Plectron
Allows entry of the four-digit capcode for Plectron paging. The valid range for the
first two digits is 00–35. The valid range for the third and fourth digits, 0–9.