Entering a programmed alias – GAI-Tronics L3149B C200 Advanced Deskset User Manual

Page 24

Operation

L3149B (C200) Advanced Tone Remote Desk Set

Entering a Programmed Alias

If paging aliases have been programmed into the desk set, press either the

or the

DOWN

button after

entering the paging menu. To scroll alphabetically, press the combination of either

LOCK

DOWN

buttons. The alias that begins with the next (or the previous) letter of the alphabet is

displayed.

Sending the Page

When the desired page appears on the display, press the

MONITOR

button to make sure the radio channel

is not in use. If programmed with an auto-channel selection, the unit selects that channel before sending
the monitor control.

When the channel is free, press

TRANSMIT

. Paging tones are generated once a channel is established and

the LCD displays:

TALK

NOW (

This is provided that talk time has been enabled for this type of paging or alias.)

Mic audio is transmitted to the paged individual. When the preprogrammed talk time has elapsed, the
desk set exits the paging mode and returns to normal operation. If the 'Do not revert' option is selected,
and the auto channel selection is programmed for a paging alias, the unit remains on the same channel
until changed by the user.

If a channel cannot be established when using a CDM1550 LS Mobile Radio, “SYS NOT AVAIL” is
displayed and the page is not sent. Additional attempts can be made by pressing the

TRANSMIT

button

again.