Delta Electronics Modbus TCP Remote I/O Communication Module RTU-EN01 - Manual (Page 33)

Modbus TCP Remote I/O Communication Module RTU-EN01
DVP-PLC Operation Manual 31
„ Parity
„ Data length
„ Stop bits
„ Station address:
The Modbus address.
2. Bit device
For setting up the addresses for the bit type serial slave device and reading or the content in the
designated slave.
„ Station address:
Enter the address of slave to be monitored. (Max. 16 slaves)
„ MODBUS (Hex):
Enter the 4-digit hex Modbus address of the slave to be monitored.
„ MODBUS (Dec):
Enter the 6-digit decimal Modbus address of the slave to be monitored.
„ Account:
Enter the number of slaves to be monitored continuously (Max. 100).