Fluke Biomedical MPS450 - Manual (Page 22)

MPS450
Operators Manual
1-8
Connection the MPS450
gje041.eps
Figure 1-1. MPS450 Patient Simulator
The right side of the MPS450 features connections for linking to blood-pressure, cardiac-
output, and temperature monitors. In addition, there is an auxiliary connection for future
expansion. The bottom of the MPS450 features an RS-232 serial port and a connection
for a battery eliminator. Prewired cables compatible with all major manufacturers’
monitors are available for simulating functions related to blood pressure, temperature,
and cardiac-output injectate. (Call your sales representative for a complete list.)
The left side of the MPS450 features a full set of universal ECG jacks, enabling the
connection of any 3-, 5-, or 12-lead ECG device. AHA and IEC color-coded dots run
along the left side of the face of the unit as an aid in connecting the corresponding U.S.
and international patient leads to the proper universal ECG jacks on the MPS450:
Table 1-2. ECG Jack Labeling
Label Meaning
RA or R Right arm
LA or L Left arm
RL or N Right leg (reference or ground)
LL or F Left led
V1, V2, V3, V4, V5, and V6 V Leads (U.S. and Canada). Also referred to as
pericardial, precordial, or unipolar chest leads.
C1, C2, C3, C4, C5, and C6 Chest leads (International)