beautypg.com

Powering up the mps450 – Fluke Biomedical MPS450 User Manual

Page 21

background image

Introduction

and

Specifications

Powering Up the MPS450

1

1-7

Powering Up the MPS450

1. Power up the system by pressing the power-on/off key (the green key located on the

keypad of the unit, bottom/right). After one short beep, the LCD screen displays the

following startup message:

gje001.eps

2. After a three-second display test, the following top menu displays:

gje002.eps

Note

Once you have the MPS450 up and running, please fill out the Registration
Card and mail it to Fluke Biomedical.

See also other documents in the category Fluke Biomedical Equipment: