Fluke Biomedical MPS450 - Manual (Page 19)

Introduction and Specifications
MPS450 Package Contents
1
1-5
Table 1-1. MPS450 Functions (cont.)
Function Category Function Description
Injectate temperature
Injectate flow
Faulty-injectate curve
Left-to-right-shunt curve
Cardiac Output
Thermodilution method,
(Option)
Calibrated pulse
The MPS450 simulates cardiac-output
waveforms for testing the accuracy and
sensitivity of cardiac-output computational
devices equipped with Baxter-Edwards-type
catheters. Injectate temperature can be set
either to “iced” or room-temperature
conditions, with adjustable flow rate (in liters
per minute). The MPS450 also simulates a
faulty-injectate curve, as well as a left-to-right-
shunt curve which is a function of temperature
(Y-axis) and time (X-axis) curve, instead of a
pressure curve.
Fixed/periodic FHR Fetal / Maternal ECG
(Option)
IUP simulation
The MPS450 simulates a combined fetal and
maternal ECG occurring during labor, as well
as a selection of pressure waveforms
produced by uterine contractions. The
contraction period is adjustable and includes a
manually generated waveform.
RS-232 serial port Remote Operations
RS-232 serial port
MPS450 features include a built-in RS-232
serial port that, when connected to a
computer, enables instrument control through
remote commands. In addition, a special
command can be used to operate the
MPS450 remotely in the numeric-control
mode.
WWarning
To prevent personal injury, use the Simulator in the manner
specified in this manual or the protection provided by the
Simulator may be impaired.
MPS450 Package Contents
Standard Equipment
• MPS450 Multiparameter Simulator
Standard Accessories
• MPS450 Operators Manual (P/N 2243350)
• Registration card
• Two 9-volt alkaline batteries (minimum 8 hours continuous use)
• Cardiac-output adapter box (P/N 2226608, standard with Cardiac-Output Option)
Optional Accessories
• Carrying case (P/N 2248623)
• Blood-pressure cables (See your local Fluke Biomedical Representative for
availability)
• Temperature cables (YSI 400 Series: P/N 2391976; 700 Series: P/N 2391983)
• High-level-output cable (P/N 2226958)