Flowserve 400MD Logix - Manual (Page 32)

Table 8.2 Block Parameter List Column Description
Column Name Description
Index
A number that corresponds to the sequence of the parameter in the block parameter segment of the object dictionary. See
Object Dictionary, Section 8.16.
Origin
STND – Standard Fieldbus Parameter defined in FF specifications
MFG – Enhanced Parameter Manufacturer defined
Name The mnemonic character designation for the parameter.
Data Type / Structure
Data type or structure for the parameter value:
1. Data types consist of simple variables or arrays and are:
• Unsigned8, Unsigned16 Unsigned32 - An unsigned variable of 8, 16 or 32 bits.
• Floating point - Floating point variable.
• Visible string - Visible string variable.
• Octet string - Octet string variable.
• Bit string - Bit string variable.
2. Data Structures consist of a record which may be:
• Value and Status - float - Value and status of a floating point parameter.
• Scaling - Static data used to scale floating point values for display purposes.
• Mode - Bit strings for target, actual, permitted and normal modes.
• Access permissions - Access control flags for access to block parameters.
• Alarm - float - Data that describes floating point alarms.
• Alarm - discrete - Data that describes discrete alarms.
• Event - update - Data that describes a static revision alarm.
• Alarm - summary - Data that summarizes 16 alerts.
• Simulate - Float - Simulate and transducer floating point value and status,and a simulate enable/disable
discrete.
• Test - Function block test read/write data.
Store
Indicates the type of memory where the parameter is stored:
S - Static — Writing to the parameter changes the static revision counter parameter ST_REV
N - Non-volatile — Parameter must be retained during a power cycle. It is not under the static update code.
D - Dynamic — The value is calculated by the block, or read from another block.
R - Readable — The value is readable by the host.
W - Writeable — The value is writeable by the host.
Default Value
Default values for the block parameters. These are the values that are used when:
• the FBAP is initialized for the first time, or
• selecting restart with defaults of the resource block parameter RESTART.
• Performing a factory reset
8.4 Resource Block
Resource Block Function
The resource block contains data and parameters related to overall operation of the device and the FBAP. Parameters that describe the hard-
ware specific characteristics of the device and support application download operations make up the resource block.
Resource Block Parameters Table 8.3 lists the FF and Flowserve-defined parameters and their default values contained in the resource block.
Table 8.3 Resource Block Parameters
Index Origin Name Store Date Type Default Value
0 STND RESOURCE_BLOCK_2 SRW Record BLOCK 0
1 STND ST_REV SR Simple UNSIGNED16 0
2 STND TAG_DESC SRW Simple OCTET_STRING “ “
3 STND STRATEGY SRW Simple UNSIGNED16 0
4 STND ALERT_KEY SRW Simple UNSIGNED8 0
5 STND MODE_BLK SRW Record MODE 0x01;0x01;0x11;0x10
6 STND BLOCK_ERR R Simple BIT_STRING 0
7 STND RS_STATE R Simple UNSIGNED8 4
8 STND TEST_RW WR Record TEST 0
9 STND DD_RESOURCE SR Simple VISIBLE_STRING “ “
Logix 3400MD Digital Positioner LGENIM3405-02 11/13
32