DR Power 16.50 Pro - Manual (Page 57)

CONTACT US AT www.DRpower.com or CALL TOLL FREE 1-800-DR-OWNER 53
Road-Towing Package
The Road-Towing Package enables the Chipper to be
towed behind a vehicle that is equipped with a 2" ball hitch
and transported on public roads to another site.
Unpacking the Road-Towing Package
Tools and Supplies Needed:
• Knife
Parts Supplied in Shipping Box (Figure 51):
• Highway Tongue Assembly
• Two Wheel Assemblies
• Two Fenders
• Axle Assembly
• Parts Box containing (Items below and Figure
52):
− Two Tail Lights with Brackets
− Wire Harness
− Wire Ties
− Hardware Package (Table below and Figure
53)
1. Cut the Box open and with a knife and place the
contents on a clean level surface.
2. Open the parts Package and lay out the Parts.
3. Open the Hardware Package and lay out the
Hardware.
4. Compare the contents of the Shipping Box, Parts Box
and Hardware Package with the Parts Supplied list
above. If there are any questions contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-
9637). Do not discard the shipping materials until you
are fully satisfied with your new Road-Towing Package.
I TEM # D ESCRIPTION Q TY
1 Dust Cap 2
2 Castle Nut 2
3 3/8-16 X 1-1/4" Bolts 4
4 3/8-16 Nylon Lock Nuts 4
5 3/8" Flat Washer 2
6 Cotter Pin 2
7 5/16-18 X 1" Bolt 4
8 5/16-18 Nylon Lock Nut 4
Wheel
Assembly
Fender
Axle
Assembly
Tongue
Assembly
Parts
Package
Figure 51
Figure 52
Hardware
Package
Wire Ties
Wire
Harness
Tail Lights
Figure 53
6
5 1
3
4
2
7
8