DR Power Walk-Behind On Board Vacuum Hose - Manual

VACUUM KIT
DR ®
LEAF and LAWN VACUUM
Vacuum kit #284221
Tools Needed:

5/16" Wrench

7/16" Wrench

Short Flat Head Screwdriver
 Wire Cutters

Utility Knife
1. Cut the Tape on the Box Flaps with a Utility Knife.
2. Remove the parts from the Box and lay them out on a flat clean area.
Shipping Box Contents (
Figure 1 and Table Below)
Item # Part Number Description Qty
1 140821 Hose, 6" Dia. X 8' Long 1
2 284711 Adapter, Vacuum 1
3 145271 Snout, Pick-up 1
4 -- Poly Bag 1
5 145201 Cable Tie, 32" 3
6 145451 Handle 1
Poly Bag Contents ( Figure 2 and Table Below)
Item # Part # Description Qty
1 145191 Tether, Wire 1
2 144401 Clamp, Hose, 6-1/8" 2
3 144251 Grip, Handle 1
4 143061 Guide, Cable 1
5
145461 Screw, Machine, Rd Hd, 1/4-20 x
3/4"
2
6 143401 Nut, Nylon Lock, 1/4-20 2
Compare the contents of the Shipping Box and Poly with the “Contents” lists above.
If you have any questions please contact us at www.DRpower.com or call 1-800-DR-
OWNER (376-9637) for assistance.
NOTE: Assembly should be done on a clean, level surface.
3. Unscrew the Hand Knobs and remove the Vacuum Snout from the machine
(Figure 3).
Figure 2
6
5
1
2
3
4
Figure 1
5
1
3
2
4
6
Figure 3
Hand
Knobs
Vacuum
Snout
Shut down the engine, remove the spark plug wire and wait 5 minutes for parts to cool before performing before installing the
Vacuum Kit.