DFI AM636-B - Manual (Page 88)

88
3
BIOS Setup
MCT Memory Timing
Move the cursor to this field and press , the following screen will ap-
pear.
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
MCT Memory Timing
Item Help
Menu Level

↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
MCT Memory Timing
x 2T Mode
x CAS Latency Time
x Precharge Delay (tRAS)
x DRAM RAS# Precharge
x DRAM RAS# to CAS# Delay
x Bank to Bank Cmd (TRRD)
x TRC
x TRFC0
x TRFC1
x TRFC2
x TRFC3
CS/ODT Pin Fine Delay
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Enabled
MCT Memory Timing
Auto
The BIOS will automatically detect all the MCT memory timing.
Manual
This option allows you to manually configure the MCT memory timing on the
following fields.
2T Mode
This field is used to configure the 2T mode.
CAS Latency Time
This field is used to select the clock cycles for the CAS latency.
Precharge Delay (tRAS)
The options are Auto, 5 CLK to 18 CLK.
DRAM RAS# Precharge
This field is used to select the idle clocks after issuing a precharge command
to the DRAM.
Enabled
5 CLK
18 CLK
5 CLK
5 CLK
3 CLK
24 CLK
75 nS
105 nS
75 nS
75 nS
The settings on the screen are for reference only. Your version may not be identical to
this one.