DFI AM636-B User Manual
Page 77
77
3
BIOS Setup
Any Key
Press any key to power-on the system.
Keyboard 98
When this option is selected, press the “wake up” key of the Windows 98
compatible keyboard to power-on the system.
KB Power On Password
Move the cursor to this field and press
enter up to 5 characters. Type in exactly the same password to confirm, then
press
The power button will not function once a keyboard password has been set in
this field. You must type the correct password to power-on the system. If you
forgot the password, power-off the system and remove the battery. Wait for a
few seconds and install it back before powering-on the system.
Hot Key Power On
This field is used to select a function key that you would like to use to power-on
the system.
PWRON After PWR-Fail
Off
When power returns after an AC power failure, the system’s power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
RTC Alarm Resume
Enabled
When Enabled, you can set the date and time you would like the Soft Power
Down (Soft-Off) PC to power-on in the “Date (of Month)” and “Resume Time”
fields. However, if the system is being accessed by incoming calls or the net-
work (Resume On Ring/LAN) prior to the date and time set in these fields,
the system will give priority to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default).
Date (of Month)
0
The system will power-on everyday according to the time set in the “Time
(hh:mm:ss) Alarm” field.
1-31
Select a date you would like the system to power-on. The system will power-
on on the set date, and time set in the “Time (hh:mm:ss) Alarm” field.