DFI AM636-B - Manual (Page 10)

1
10
Introduction
Rear Panel I/O
Internal I/O
Power
Management
Hardware
Monitor
Temperature
Humidity
PCB
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 1 DVI-I port (DVI-D digital signal only)
• 1 DVI-I port (Digital and Analog signals)
• 1 RJ45 LAN port
• 6 USB 2.0/1.1 ports
• Center/subwoofer, rear R/L and side R/L jacks
• Line-in, line-out (front R/L) and mic-in jacks
• 3 connectors for 6 additional external USB 2.0/1.1 ports
• 1 front audio connector for line-out and mic-in jacks
• 2 connectors for 2 external serial ports
• 1 CD-in connector
• 1 IDE connector
• 1 FDD connector
• 6 Serial ATA connectors
• 1 IrDA connector
• 1 CIR connector
• 1 24-pin ATX power connector
• 1 8-pin 12V power connector
• 1 front panel connector
• 4 fan connectors
• ACPI specification 2.0 compliant power management
schemes
• Supports S1 and S3
• Wake-On-Events include:
- Wake-On-PS/2 KB/Mouse
- Wake-On-USB KB/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system
• AC power failure recovery
• Monitors CPU/system temperature
• Monitors
CPU/DIMM/3.3V/5V/12V/5VSB/1.2V/Vbat volt-
ages
• Monitors CPU/system fan speed
• Read back capability that displays temperature, voltage
and fan speed
• Watchdog timer function
• 0
o C to 60 o C
• 10% to 90%
• ATX form factor
• 30.5cm (12”) x 24.4cm (9.6”)