DFI AM636-B - Manual (Page 59)

59
3
BIOS Setup
Hard Disk Boot Priority
Refer to the next section for more information on this submenu.
CPU Internal Cache and External Cache
These fields speed up the memory access. The default is Enabled, which provides
better performance by enabling cache.
Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the system is powered
on. The BIOS will shorten or skip some check items during POST. To attain the
shortest POST time, select “Fast”.
First Boot Device, Second Boot Device, Third Boot Device and Boot Other
Device
Select the drive to boot first, second and third in the “First Boot Device” “Sec-
ond Boot Device” and “Third Boot Device” fields respectively. The BIOS will boot
the operating system according to the sequence of the drive selected. Set “Boot
Other Device” to Enabled if you wish to boot from another device.
Advanced BIOS Features
The Advanced BIOS Features allows you to configure your system for basic op-
eration. Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some fea-
tures according to your preference.

Hard Disk Boot Priority
CPU Internal Cache
External Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up Numlock Status
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
HDD S.M.A.R.T Capability
Full Screen LOGO Show
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
Menu Level

Press Enter
Enabled
Enabled
Enabled
CDROM
Hard Disk
CDROM
Enabled
On
30
250
Setup
Enabled
1.4
Non-OS2
Disabled
Enabled
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
The settings on the screen are for reference only. Your version may not be identical to
this one.
Select Hard Disk Boot
Device Priority