Bios setup – DFI AM636-B User Manual
Page 80
80
3
BIOS Setup
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can work with PCI/
VGA or not. The default value is Disabled.
Enabled
MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled
MPEG ISA/VESA VGA cards does not work with PCI/VGA.
Assign IRQ for VGA
When Enabled, the system automatically assigns an IRQ for the VGA card in-
stalled. Your VGA card will need an IRQ only when using the video capture func-
tion of the card. If you are not using this function and a new device requires an
IRQ, you can set this field to Disabled. The IRQ (previously occupied by the VGA
card) will be available for your new device.
Assign IRQ for USB
When Enabled, the system automatically assigns an IRQ for the USB device con-
nected to your system. However, if you are not using USB devices and an ISA
slot requires an IRQ, set this field to Disabled. The IRQ previously occupied by
the USB device will be available for the ISA slot.
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
Item Help
Menu Level
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Legacy ISA for
devices compliant with
the original PC AT bus
specification. PCI/ISA
PnP for devices compli-
ant with the Plug and
Play standard whether
designed for PCI or ISA
bus architecture.
IRQ Resources
Move the cursor to this field and press
system interrupt to either Reserved or PCI Device.
The settings on the screen are for reference only. Your version may not be identical to
this one.