DFI AM636-B - Manual (Page 61)

61
3
BIOS Setup
Full Screen Logo Show
This field is applicable only if you want a particular logo to appear during system
boot-up.
Enabled
The logo will appear in full screen during system boot-up.
Disabled
The logo will not appear during system boot-up.
Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives. Move the cursor
to this field then press . Use the Up or Down arrow keys to select a de-
vice then press <+> to move it up or <-> to move it down the list.
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Item Help
Menu Level

Use < ↑ > or < ↓ > to select
a device, then press <+>
to move it up, or <-> to
move it down the list.
Press to exit this
menu.
↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
1. Bootable Add-in Cards
The settings on the screen are for reference only. Your version may not be identical to
this one.