DFI AM636-B - Manual (Page 57)

57
3
BIOS Setup
IDE Auto-Detection
Extended IDE Drive
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Phoenix - AwardBIOS CMOS Setup Utility
Internal Phy SATA 1
Item Help
Menu Level

To auto-detect the
HDD’s size, head... on
this channel
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
0
0
0
0
0
Press Enter
Auto
Auto
0 MB
Head
This field displays the number of read/write heads.
Precomp
This field displays the number of cylinders at which to change the write tim-
ing.
Landing Zone
This field displays the number of cylinders specified as the landing zone for
the read/write heads.
Sector
This field displays the number sectors per track.
Internal Phy SATA 1 to Internal Phy SATA 4
These fields are used to configure Serial ATA drives. Move the cursor to a field
then press . The following screen will appear.
Note:
The fields for configuring Serial ATA drives will appear only if the Serial
ATA function is Enabled. Enable this function in the Integrated Peripher-
als submenu of the BIOS.
The settings on the screen are for reference only. Your version may not be identical to
this one.