DFI AM636-B - Manual (Page 62)

62
3
BIOS Setup
This section gives you functions to configure the system based on the specific
features of the chipset. The chipset manages bus speeds and access to system
memory resources.
These items should not be altered unless necessary. The
default settings have been chosen because they provide the best operating con-
ditions for your system. The only time you might consider making any changes
would be if you discovered some incompatibility or that data was being lost while
using your system.
PCIE Configuration
IGX Configuration
Init Display First
IGX
When the system boots, it will first initialize the onboard VGA.
PCIEx
When the system boots, it will first initialize the PCI Express x16 graphics
card.
NB Power Management
Dynamic clock gating for IOC/NT/MCU/CFG. The options are Auto, Enabled and
Disabled.
Advanced Chipset Features
3
Close
by CAS# LT
Slow
Slow
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

PCIE Configuration

IGX Configuration
Init Display First
NB Power Management
Memory Hole
System BIOS Cacheable
Press Enter
Press Enter
PCIEx
Auto
Disabled
Disabled
Refer to the following pages for more information on
these submenus.
The settings on the screen are for reference only. Your version may not be identical to
this one.