DFI AM636-B - Manual (Page 75)

75
3
BIOS Setup
Power Management Setup
The Power Management Setup allows you to configure your system to most ef-
fectively save energy.
ACPI Function
This function should be enabled only in operating systems that support ACPI. If
you want to use the Suspend to RAM function, make sure this field is enabled
then select “S3(STR)” in the field below.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
C2 Disable/Enable
The options are Enabled and Disabled.
MODEM Use IRQ
This field is used to select an IRQ channel for the modem installed in your sys-
tem.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Function
ACPI Suspend Type
C2 Disable/Enable
Modem Use IRQ
Soft-Off by PWRBTN
PowerOn By PCI Card
ACPI XSDT Table
HPET Support
Power On Function
x KB Power On Password
x Hot Key Power On
PWRON After PWR-Fail
RTC Alarm Resume
x Date (Of Month)
x Resume Time (hh:mm:ss)
Enabled
S1(POS)
Disabled
NA
Instant-Off
Disabled
Disabled
Enabled
Button Only
Enter
Ctrl-F1
Off
Disabled
0
0:0:0
The settings on the screen are for reference only. Your version may not be identical to
this one.