Datatek DT-4180 - Manual (Page 78)

9 4 8 0 , 4 1 8 0 , 4 2 8 0 , 4 2 8 4 4 0 0 0 X A U s e r M a n u a l
04/09/09
78
13.6 Cabling to a Westronic WS2000 E2A Remote
The xxxx series is able to accept the E2A protocol on any of its ports. The Westronic
WS2000 is an E2A remote interface for discrete scan points.
The Westronic WS2000 presents wire wrap pins and not an actual connector. The
cabling is depicted in the diagram below. The port is configured prot=E2A , DXE=DCE,
and PAP=ON. The originate and receive options for the port are dependent on the
deployment.
1 2 3 4 5 6 7 8
RJ45 Female Pin Numbering
RJ45
1
2
3
4
5
6
7
8
4xxx to Westronic WS2000
WS2000 Wire Wrap Pin
RTS
GND
DCD
CTS
RxD
TxD
GND