Datatek DT-4180 User Manual
Page 50
9 4 8 0 , 4 1 8 0 , 4 2 8 0 , 4 2 8 4 4 0 0 0 X A U s e r
M a n u a l
04/09/09
50
of + will add the
will delete the
If the telnet console is connected at the time a closed user group is defined, the
connection must be allowed in the closed user group. If the connection is not allowed, an
error message is displayed and the association will not take place.
If it is desirable to disable the telnet console entirely, a closed user group consisting only
of the xxxx address may be assigned to the console. The net effect is to disallow any
and all connections via the telnet console.
6.1.33
Administrative Logins & Command Security
Syntax: admpass lev=<#> [old=
new=
confirm=
The xxxx supports the concept of “Administrative Passwords”. When defined, there are
four levels of “Administrative Passwords” in addition to the general user password. The
command set is divided among the various levels of administrators. The General User
has the least permissions, and a Level 4 administrator has global permissions.
If the administrative passwords are not defined, the general user has global permissions.
The level 4 administrative password must be define first. Once the level 4 administrative
password is defined, it is required to change any of the administrative passwords.
The old=
administrative password. It is also not required if the level 4 administrator wishes to
change any of the lower level passwords.
Once administrative passwords are set, the xxxx command set requires the following
authority:
ADMPASS
Level 4 Administrator
BANNER
Level 4 Administrator
CHGPASS General
User
CLEAR
Level 1 Administrator
CONSOLE
Level 3 Administrator
CUG
Level 3 Administrator
DBRESET
Level 4 Administrator
DCACHE General
User
DCONN General
User
DIAG
Level 2 Administrator
DISC
Level 2 Administrator
DLOG General
User
DMEAS General
User
DNS
Level 4 Administrator