CREATOR CAT5 - Manual (Page 22)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
The second generation Digital CAT5 transmitter User 's Manual 16
Model
Parameters
CR-uCAT5 DVI 200T transmitter
Audio input 1 analog stereo input,3.5MM earphone socket
Frequency response 20Hz——20KHz ±0.05db
Input level 2Vrms(maximum)
Control interface
Serial port control
RS232 (3.5MM earphone socket)
Baud rate 110-115200bps
Infrared control IR (3.5MM earphone socket)
IR frequency 38K
DVI monitoring output
supported protocol
DVI1.0 EDID1.4
Bandwidth Pixel Bandwidth165MHz , full digital
Interface bandwidth 6.75Gbps
The maximum
supported resolution
Normal PC: 1600x1200@60Hz
HDPC: 1900x1200@60Hz
HDTV: 1920x1080P@60Hz
Signal type DVI 1.0 / T.M.D.S. full digital signal
Interface DVI-D Interface
Signal strength T.M.D.S. +/- 0.4Vpp
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance Differential100Ω
Maximum output
distance of video
cable
Less than 7m,when the resolution is 1920x1080P@60 (recommended to use
certified HDMI cable,such as Molex TM cable)
HDBaseT Output
Interface
Interface
High speed RJ45
Transmission
distance
Up to 100m via CAT5e/6 shielding cable
Power supply DC 12V/1.5A
Maximum power
dissipation
7.5W
2.7.3 CR-uCAT5 DVI 200R Technical Parameters
Model
Parameters
CR-uCAT5 DVI 200R Receiver
DVI video output
Supported protocol
DVI1.0,EDID1.4
Bandwidth Pixel Bandwidth165MHz , full digital
Interface bandwidth 6.75Gbps
Output resolution Support any resolution output by sending end