3operatinginstructions – CREATOR CAT5 User Manual
Page 11

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
The second generation Digital CAT5 transmitter User 's Manual
5
2.2.3 Operating Instructions
The VGA interface supports CV, YC, YUV, VGA,
RGBHV five kinds of video signal input. The
RGBHV input needs to match a RGB to VGA
connecting line by user. There is a VGA to RCA
female, S terminal female connecting line in
factory configuration. User should connect the
terminals with the same color, namely: RCA red
terminal is connected to Pr (Cr), RCA green
terminal is connected to Y, RCA blue terminal to
Pb (CB).
1
In the VGA input state, if user wants to
replace the connecting line and switch to any
channel among CV, YC, YUV, he should re-power
the device after changing the connecting line
2
The engineering serial interface of device is
only for project debugging, does not support the
transmission. It can be connected to control
device via 3.5MM earphone socket to DB9 female
socket connecting line.
3
The device supports power-off memory
function. Either with the engineering serial
instruction or operation panel code, key button,
the device will preserve the last operation.