7technicalparameters, 1cr-ucat5av200ttechnicalparameters, 7 technical parameters – CREATOR CAT5 User Manual
Page 19

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
The second generation Digital CAT5 transmitter User 's Manual
13
2.7 Technical Parameters
2.7.1 CR-uCAT5 AV 200T Technical Parameters
Model
Parameters
CR-uCAT5 AV 200T Transmitter
HDMI video input
Supported protocols
HDMI1.3a, HDCP1.3,EDID1.4
Bandwidth
Pixel bandwidth 165MHz, full digital
Interface bandwidth
6.75Gbps
The
maximum
supported resolution
Normal PC: 1600x1200@60Hz HDPC: 1900x1200@60Hz
HDTV: 1920x1080P@60Hz
Signal type
HDMI 1.3a / T.M.D.S. full digital signal
Interface
HDMI-A Interface
Signal strength
T.M.D.S. +/- 0.4Vpp
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance
Differential 100Ω
Video cable maximum
input / output distance
Less than 7 meters, in the 1920x1080P@60 (recommended the use of
certified HDMI special wire, as Molex TM wire)
DVI video input
Supported protocols
DVI1.0,EDID1.4
Bandwidth
Pixel bandwidth 165MHz, full digital
Interface bandwidth
6.75Gbps
The
maximum
supported resolution
Normal PC: 1600x1200@60Hz
HDPC: 1900x1200@60Hz
HDTV: 1920x1080P@60Hz
Signal type
DVI-D T.M.D.S. full digital signal
Interface
DVI-D Interface
Maximum
input
distance
of
video
cable
Less than 7 meters, in the 1920x1080P@60 (recommended the use of
certified HDMI special wire, as Molex TM wire)
Signal strength
T.M.D.S. +/- 0.4Vpp
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance
Differential 100Ω
CV analog video input
Format
NTSC,PAL,SECAM
Signal type
Composite video(CVBS)
Interface
DB15 male to RCA female (custom line)
Signal strength
1V p-p : composite video(CVBS)
Minimum / maximum
level
Analog signal: -2V/+2V
Impedance
75Ω