Comtech EF Data MBT-4000B - Manual (Page 59)

Multi-Band Transceiver System Revision 0
Remote Command MN/MBT4000B.IOM
A-23
Parameter
Type
Command
(Instruction
Code and
qualifier)
Valid on
MBT,
BDC, or
BUC
Arguments for
Command or
Response to
Query
Description of arguments
(Note that all arguments are ASCII numeric codes, that is,
ASCII codes
between 48 and 57)
Response to
Command
(target to controller)
Query
(Instruction
Code and
qualifier)
Response to
query
(target to
controller)
Retrieve
Configuration
Status
N/A All 65 bytes (MBT-
4000B)
98 bytes
(BDC),
76 bytes (BUC)
alphanumeric
Query only.
Used to Query the configuration status of the unit
Example for MBT-4000B base:
<0001/RCS?{cr}
>0001/RCS={cr}
BF1=X {cr}
BF2=X {cr}
BT1=DN{cr}
BT2=UP{cr}
RED=0{cr}
RAM=00{cr}
MBT=N, A, or B
EXT=0{cr}{lf}
Example for BDC or BUC:
<0001A1/RCS?{cr}
>0001A1/RCS={cr}
FLO=06300{cr}
ATT=01.00{cr}
MUT=1{cr}
SLP=0.3{cr}
LCS=0{cr}
LCW=99{cr}
LFL=1{cr}
REF=XXXX{cr} (reserved for future use)
XRE=X{cr} (reserved for future use)
AFR=0{cr}{lf}
Note: for BUC, LCS, LCW, & LFL will not be shown.
N/A RCS? RCS=x….x
(see
description for
details of
arguments)