Comtech EF Data SMS-758 - Manual (Page 151)

SMS-758 Modem Protection Switch Remote Control Operation
MN/SMS758 Rev. 3 B–7
B.3.3 Modem Configuration Commands/Responses
B.3.3.1 Prime Modem Address
Address “0” may be used to clear the address field of modem “x”.
Command:
Response: >add/ADD_x_yyy”cr””lf”]
Status Only:
Response: >add/ADD_x_yyy”cr””lf”]
Where:
x = 1 to 8 (prime modem number).
yyy = 1 to 255 (prime modem address).
B.3.3.2 Backup Modem Address
Address “0” may be used to clear the address field of modem “x”.
Command:
Response: >add/ADD_Bx_yyy”cr””lf”]
Status Only:
Response: >add/ADD_Bx_yyy”cr””lf”]
Where:
x = 1 to 8 (backup modem number).
yyy = 1 to 255 (backup modem address).
B.3.3.3 Prime Modem Interface Type
Command:
Response: >add/INT_x_y”cr””lf”]
Status Only:
Response: >add/INT_x_y”cr””lf”]
Where:
x = 1 to 8 (prime modem number).
y = 1 (for 15 D), 2 (for V.35), 3 (for RS-422), 4 (for DCTN), 7 (for IBS), 8 (for D&I),
5 (for IDR), 6 (for OTHER), or 9 (for IDR 2:N).