Comtech EF Data SMS-758 - Manual (Page 132)

Remote Control Operation SMS-758 Modem Protection Switch
A–10 MN/SMS758 Rev. 3
A.3.4.5 Backup Modem Fault Status
Command:
Response: >add/MFS_Bx”cr”
MOD_yyy”cr” M od Status (OK/FLT)
DMD_yyy”cr””lf”] D emod Status (OK/FLT)
Where: x = 1 or 2 (backup modem number).
A.3.4.6 Firmware Version Status
Command:
Response: >add/VER_x.xxx”cr””lf”]
Where: x.xxx = Firmware version number.
A.3.4.7 Equipment Type
This command returns the equipment type polled and the software version.
Command:
Response: >add/ET_xxx_yyy”cr””lf”]
Where: xxx = Equipment Type.
A.3.5 Operational Commands
A.3.5.1 Time of Day
Command:
Response: >add/TIME_hh:mmyy”cr””lf”]
Status Only:
Response: >add/TIME_hh:mmyy”cr””lf”]
Where:
hh = hour.
mm = minute.
yy = AM or PM.
Example: Set switch 67 time to 10:45PM.
Command: <67/TIME_10:45PM”cr”
Response: >67/TIME_10:45PM”cr””lf”]