Comtech EF Data SMS-758 - Manual (Page 149)

SMS-758 Modem Protection Switch Remote Control Operation
MN/SMS758 Rev. 3 B–5
B.3.1.4 Backup Modulator Active
Command:
Response: >add/MA_Bx_yyy”cr””lf”]
Status Only:
Response: >add/MA_Bx_yyy”cr””lf”]
Where:
x = 1 or 2 (backup modulator number).
yyy = YES or NO.
B.3.2 Demodulator Configuration Commands/Responses
B.3.2.1 Prime Demodulator Active
Command:
Response: >add/DA_x_yyy”cr”
Status Only:
Response: >add/DA_x_yyy”cr””lf”]
Where:
x = 1 to 8 (prime demodulator number).
yyy = YES or NO.
B.3.2.2 Prime Demodulator Priority
Command:
Response: >add/DP_x_y”cr””lf”]
Status Only:
Response: >add/DP_x_y”cr””lf”]
Where:
x = 1 to 8.
y = 1, 2, or 3 (1 is high priority, 2 is medium priority, and 3 is low priority).