Comtech EF Data SMS-758 - Manual (Page 126)

Remote Control Operation SMS-758 Modem Protection Switch
A–4 MN/SMS758 Rev. 3
A.3 Configuration Commands/Responses
A.3.1 Modulator Configuration Commands/Responses
A.3.1.1 Prime Modulator Active
Command:
Response: >add/MA_x_yyy”cr”
Status Only:
Response: >add/MA_x_yyy”cr””lf”]
Where:
x = 1 to 8 (prime modulator number).
yyy = YES or NO.
A.3.1.2 BackupModulator Active
Command:
Response: >add/MA_Bx_yyy”cr””lf”]
Status Only:
Response: >add/MA_Bx_yyy”cr””lf”]
Where:
x = 1 or 2 (backup modulator number).
yyy = YES or NO.
A.3.2 Demodulator Configuration Commands/Responses
A.3.2.1 Prime Demodulator Active
Command:
Response: >add/DA_x_yyy”cr”
Status Only:
Response: >add/DA_x_yyy”cr””lf”]
Where:
x = 1 to 8 (prime demodulator number).
yyy = YES or NO.