Comtech EF Data turboIP-45 - Manual (Page 36)

turboIP-45 Performance Enhancement Proxy Revision 0
Configuring turboIP-45™ CD/TURBOIP45.IOM
4–12
If SNMP v2 is selected, see the following table.
Step Configuring Item for
SNMP v2 Default
Value Format Example
1 SNMP sysName N/A ‘Comtech’
2 SNMP sysLocation N/A ‘Tempe, Arizona’
3 SNMP sysContact N/A ‘TechSupport’
4 Trap Destination Ip
Address N/A ddd.ddd.ddd.ddd ‘192.1.1.1’
5 Read Community N/A Between 1-255 characters ‘public’
6 Set Community N/A Between 1-255 characters ‘private’
7 Trap Community N/A Between 1-255 characters ‘trap’
8 enable SNMP N/A 1 for Enable
2 for Disable
9 Save SNMP Changes N/A 1 for save changes
2 for Cancel changes
10 Return to Configuration
Wizard N/A
turboIP-45 Configuration Wizard