Comtech EF Data turboIP-45 - Manual (Page 26)

turboIP-45 Performance Enhancement Proxy Revision 0
Configuring turboIP-45™ CD/TURBOIP45.IOM
4–2
4.3 User Interfaces
turboIP-45 supports a basic menu-driven interface, which is accessible using the console port, or a web-
based graphical user interface (GUI). The interfaces contain the same functionality, with one exception.
The USERID and PASSWORD are only configurable via the console connection, for obvious security
reasons.
4.3.1 Console Settings
Baud Rate 38,400 bps
Data Bits 8
Parity None
Stop Bits 1
Hardware Flow Control None
Software Flow Control None
Terminal Emulation VT100/VT100J
Cable Configuration Straight - Through
IMPORTANT
1. Entry of the numeric pad’s arrow keys when the NumLock is OFF will work under Hyperterminal,
provided that the client is running Windows 2000, Service Pack 4. Microsoft has acknowledged a bug
for Hyperterminal shipped with Windows 2000 prior to Service Pack 2 where the arrow keys were non-
functional. (http://support.microsoft.com/default.aspx?kbid=263077).
2. Web-based graphical user interface (GUI) CAN ONLY be turned on in CLI. End-user is required to run
Configuration Wizard for initial setup or log into CLI Menu to ENABLE “Web User Interface.’