Comtech EF Data turboIP-45 - Manual (Page 31)

turboIP-45 Performance Enhancement Proxy Revision 0
Configuring turboIP-45™ CD/TURBOIP45.IOM
4–7
4.4.2.3 Configuration Wizard turboIP-45 – Network Settings for
Remote Access
Network Settings – To allow access to the turboIP-45 via the network (using the Web or SNMP IP
interface) select ‘Yes’.
Management IP Address/Subnet Mask – Enter the IP you wish to assign to the turboIP-45 (both the
LAN and WAN port will respond to this IP).
Default Gateway - Enter the IP of the Gateway (must be on same subnet as
Management IP).