Comtech EF Data KST-12000 - Manual (Page 74)

KST-12000 Ku-Band Satellite Terminal Revision 4
Redundant System Installation MN/KST12000.IOM
13. Install the appropriate O-ring between the flexible waveguide attached to port 4
of the waveguide switch and the waveguide flange on the RFT “B.”
14. Using four 6-32 x 7/8” socket head cap screws, four #6 split lockwashers, eight
#6 flat washers, and four 6-32 nuts, attach the flexible waveguide (attached to
port 4 of the waveguide switch) to the waveguide flange on the RFT “B.”
Tighten the cap screws firmly.
3.4 RSU-503L Installation
Refer to the Comtech EF Data RSU-503 Redundancy Switch Unit Installation and
Operation Manual.
3.5 External Connections
Refer to Section 2.5 in Chapter 2 for external connections information.
3–22