Comtech EF Data KST-12000 - Manual (Page 22)

KST-12000 Ku-Band Satellite Terminal Revision 4
Introduction MN/KST12000.IOM
1.3 Specifications
Table 1-1 lists the specifications for the KST-12000 system, Table 1-2 lists the
specifications for the RFT-1200, and Table 1-3 lists the specifications for the LNA.
Notes:
1. For specifications on the RSU-503L, refer to Appendix A of the Comtech EF
Data RSU-503 Redundancy Switch Unit Installation and Operation Manual.
2. For more information pertaining to KST-12000 specifications, refer to Comtech
EF Data Specification SP/3044.
Table 1-1. KST-12000 System Specifications
Parameter Specification
RF Input Connector Type N Female
RF Output Connector WR-75G
TX Band 14.0 to 14.5 GHz
RX Band 10.95 to 12.75 GHz
10.95 to 11.7 GHz
11.7 to 12.2 GHz
12.25 to 12.75 GHz
IF Interface Two 70 MHz ports
IF Out Connector Type TNC female
IF In Connector Type TNC female
IF Out Impedance 50 Ω
IF Out Return Loss > 19 dB at 70 MHz, ± 18 MHz
IF In Impedance 50 Ω
IF In Return Loss > 19 dB at 70 MHz, ± 18 MHz
1–8