Comtech EF Data KST-12000 - Manual (Page 55)

KST-12000 Ku-Band Satellite Terminal Revision 4
Redundant System Installation MN/KST12000.IOM
3.2.1 Included Parts
A typical redundant KST-12000 configuration contains the following components.
Notes:
1. Parts are not drawn to scale.Because each system can be custom ordered, it is
beyond the scope of this manual to provide the unlimited configuration
possibilities.
2. This chapter does not describe the installation procedures for amplifiers, high
performance LNAs, phase-locked LNBs, LNBs, and phase-locked block
converters.
3. Comtech EF Data is referenced throughout this section as CEFD.
Qty. Description Qty. Description
2 RFT outdoor unit.
1 Redundant LNA plate.
Note: Pictured is a typical LNA. Other LNAs
are available, and can be ordered from an
CEFD marketing representative.
1 RSU-503L. 1 KST-12000 installation and operation manual.
1 Envelope containing the test data sheet.
1 RSU-503 installation and operation manual.
1 Monitor and Control Software for Comtech EF
Data Satellite Terminals User’s Guide.
3–3